How to check monitor arm compatibility
Four checks cover most fit problems: the mounting holes, the weight, the size and the desk edge.

1. Find the VESA pattern
Look at the back of the monitor for four screw holes in a square. Measure between hole centres, or check the monitor's manual. Common patterns are 75 x 75 mm and 100 x 100 mm. If there are no holes, the monitor needs an adapter or cannot be mounted.
2. Check the weight
Find your monitor's weight without the stand in its manual or spec sheet. Compare it with the arm's stated weight range per arm. Gas-spring arms usually also list a minimum weight.
3. Check the screen size
Compare your screen size with the arm's stated range. For curved or ultrawide screens, check whether the listing names them.
4. Check the desk
Measure the thickness of your desk edge and compare it with the clamp range. Check there is clear space under the edge for the clamp, with no drawer, frame or rail in the way. For a grommet mount, you need a hole or the option to drill one.
5. Standing desks
Add the arm and monitor weight to everything else on the desk and compare it with the desk's stated capacity.
Before you buy, compare the listing's stated dimensions (width, depth and height) and weight capacity with your measurements, and check what is in the box: some listings are complete workstations, others are a single component such as a desktop, panel or pedestal.
How we chose
We have not tested these products. Each pick is matched to this page using its live Amazon listing and the maker's information, checked on the date shown on the card. See our editorial methodology.
Questions
My monitor has no screw holes. Can I mount it?
Not directly. Some monitors need a maker's adapter; check your monitor's manual.
Where do I find my monitor's weight?
In its manual or spec sheet. Use the weight without the stand.
Have you tested these arms?
No. CubicleDesks is research-based: we compare live Amazon listings and manufacturer information. We have not tested these products ourselves, and if we ever add hands-on testing the page will say so.